Developed for demanding applications requiring the
measurement of high amplitude and short duration transient events such as
pyrotechnic shock or high energy impacts, the A/162 IEPE accelerometer has a
range of ±25,000g and a sensitivity of 0.20mV/g (±10%).
The design of our more standard accelerometers have
limitations when used for shock applications, these can either be due to the
short duration of the transient event or due to the high level of the shock
amplitude, either of these elements can cause issues for a standard vibration
sensor and the hybrid electronics used in the IEPE accelerometers. To overcome
these issues the A/162 has in built filters; both electrical and mechanical
which ensure the response is linear across a wide frequency band (1Hz to
15kHz), and up to a peak amplitude measurement of 25,000g.
The A/162 is also designed to withstand over testing, the
accelerometer can measure up to 25,000g, but features physical built in
protection up to 50,000g. This is necessary due to the highly variable and
sometimes unpredictable nature of pyrotechnic events.
Other applications requiring high transient acceleration
measurements can include:
Pile Driver Monitoring
Simulated Pyroshock Event
Recoil and Penetration
Impact Press Monitoring
All DJB Accelerometers are calibrated on site prior to despatch, and are accompanied by a calibration chart with temperature and frequency responses listed.
Periodic calibration can be carried out with our VC-01 Handheld Calibrator whilst we also offer a full calibration service including cross axis checks to aid accuracy of data.
We are able to provide this service for all makes of accelerometer with a full report given for each device. Please contact us with an enquiry
Cable Assembly and Repair Service
- Cable Repair Service to make current cabling as good as new, cutting costs whilst good for the environment
- Specialist Cable Assembly - for all manufacturers
- Cable and connector stock held for a quick turnaround