This website is using cookies
We use cookies to analyse usage and traffic which allows us to improve our site. By continuing to browse the site, you are consenting to our use of cookies.
x

Instrumented Impact Hammer Range IH-50

0.1mV/N  ∙  1000gm  ∙  

 Datasheet

The IH-50 impact hammer belongs to a range of general purpose hammers used for structural health testing, resonance determination and modal analysis, the IH-50 itself being suitable for more heavy weight testing.

Included within the hammer is a piezoelectric IEPE force sensor in which directly outputs a voltage signal.
Each hammer is supplied as a kit including a cable and a variety of tips able to suit a variety of testing requirements.

The IH-50 has a BNC terminating connector and an additional mass that can be attached to the rear of the hammer head. Impact pules width and frequency response is different with different hammer heads and tips. It should be based on actual tests.

The IH-01-50 impact hammer belongs to a range of general purpose hammers used for structural health testing, resonance determination and modal analysis, the IH-01-50 itself being suitable for testing of lightweight structures such as PCB's.

Included within the hammer is a piezoelectric IEPE force sensor in which directly outputs a voltage signal.
Each hammer is supplied as a kit including a cable and a variety of tips able to suit a variety of testing requirements.

The IH-01-50 has a M5 terminating connector and an additional mass that can be attached to the rear of the hammer head. Impact pules width and frequency response is different with different hammer heads and tips. 

Click here for the full data sheet

Hammers Ih50