The A/133/V IEPE range of voltage triaxial
accelerometers, feature ultra high temperature usage on surfaces up to 900°C.
Developed as solutions for Vibration Measurements on exhaust pipes or engine
turbo collectors, they have since found uses in many other high temperature
Mono-axial versions can also be supplied on request, axis selection to suit
Water flow is via two titanium pipes and it’s recommended that the flow rate of
0.5 litres/min is maintained permanently when in use at high temperature.
Failure to do so could lead to injury and damage to the unit.
It is recommended at the highest temperatures a constant supply of chilled
cooling water should be used.
The A/133/V consists of 3 mono axial voltage accelerometers mounted into an
anodized aluminium block. This allows the advantage of single axis repair if
Accessories: Silicone tubing, General purpose 12V pump
All DJB Accelerometers are calibrated on site prior to despatch, and are accompanied by a calibration chart with temperature and frequency responses listed.
Periodic calibration can be carried out with our VC-01 Handheld Calibrator whilst we also offer a full calibration service including cross axis checks to aid accuracy of data.
We are able to provide this service for all makes of accelerometer with a full report given for each device. Please contact us with an enquiry
Cable Assembly and Repair Service
- Cable Repair Service to make current cabling as good as new, cutting costs whilst good for the environment
- Specialist Cable Assembly - for all manufacturers
- Cable and connector stock held for a quick turnaround