This website is using cookies
We use cookies to analyse usage and traffic which allows us to improve our site. By continuing to browse the site, you are consenting to our use of cookies.
x

Instrumented Impact Hammer IH-50 - 50kN Range

 Datasheet

The IH-50 impact hammer belongs to a range of general purpose hammers used for structural health testing, resonance determination and modal analysis, the IH-50 itself being suitable for more heavy weight testing.

Included within the hammer is a piezoelectric IEPE force sensor in which directly outputs a voltage signal.
Each hammer is supplied as a kit including a cable and a variety of tips able to suit a variety of testing requirements.

The IH-50 has a BNC terminating connector and an additional mass (optional) that can be attached to the rear of the hammer head. Impact pulse width and frequency response varies with different hammer heads and tips. It should be based on actual tests.

Specification

Model IH-50
Sensitivity 0.1mV/N
Hammer Head Weight 1000gm
Hammer Head Diameter 51mm
Hammer Length 400mm
Output BNC
Tips Supplied Soft, medium, hard