Accelerometer Mounting Studs

 Accelerometer Selection - Points to consider

 Mounting Guide

Non Isolated Mounting Studs/Base

Product Code            Description  

SF/01                        Flat adhesive base, 22.2mm diameter, 5.8mm x ¼-28 UNF thread
SF/02                        Flat adhesive base, 12mm diameter, 3.7mm x 10-32 UNF thread
SF/03                        Flat adhesive base, 15.9mm diameter, 3.3mm x 10-32 UNF thread 
SP/01                       Mounting stud,4.2mm ¼-28 UNF / 12.7mm ¼-28UNF thread
SP/02                       Mounting stud,2.7mm 10-32 UNF / 9.7mm 10-32 UNF thread
SP/03                       Mounting stud 2.7mm 10-32 UNF / 5.0mm M5 thread
SP/04                       Mounting stud 2.7mm 10-32 UNF / 5.0mm M6 thread
SA/03                       Adhesive base for A/123/S & A/123/TS
SA/04                       Adhesive base for A/124/TS

Isolated Mounting Studs/Base

Product Code            Description  

IS/01                         Flanged mounting stud, 2.8mm 10-32 UNF / 5.0mm 10-32 UNF thread   
IS/02                         Flanged mounting stud, 2.8mm 10-32 UNF / 5.0mm M5 thread
IS/03                         Flanged mounting stud, 3.7mm 10-32 UNF / 5.0mm 10-32 UNF thread   
IS/04                         Flanged mounting stud, 3.7mm 10-32 UNF / 5.0mm M5 thread
IS/05                         Flanged mounting stud, 4.1mm ¼-28 UNF / 5.0mm ¼-28 UNF thread
SI/03                         Flanged mounting stud, 3.7mm 10-32 UNF / 14.5mm 10-32 UNF thread
SI/05                         Flanged mounting stud, 2.8mm 10-32 UNF / 5.0mm 10-32 UNF thread
SI/08                         Flanged mounting stud, 3.7mm 10-32 UNF / 5.0mm M5 thread
SI/09                         Flanged mounting stud, 3.7mm 10-32 UNF / 9.5mm M5 thread   
SI/10                         Flanged mounting stud, 3.7mm 10-32 UNF / 9.5mm M6 thread
SI/11                         Flanged mounting stud, 10-32 UNF
SI/14                         Flanged mounting stud, 10-32 UNF/M5
SI/22                         Stud kit for A/22 Included with A/22
CL/01                        AT/13 clip (bag of 50 MOQ)

Petro Wax 

Petroleum based wax is a great way of carrying out Modal testing and other quick ‘look see’ type tests due to the ease of removal and refitting.  However, it should only be used for relatively low frequency testing and as with adhesive, a minimal amount of wax should be used due to the potential for damping to occur. Petrowax should only be used at ambient conditions as temperature will render the wax useless. Sliding the accelerometer into place with the wax on the base creates a good bond and removes excess wax. 

Available in 25mm square boxes. Colour - Purple of course!